| Catalogue No | Description | Size | Finish |
| 2.4GHZSYSTEMBH |
Wireless System, c/w Belt Pack & Headset Microphone
| 2.4GHz | |
| 2.4GHZSYSTEMBT |
Wireless System, c/w Belt Pack & Tie Clip Microphone
| 2.4GHz | |
| 2.4GHZSYSTEMH |
Wireless System, c/w Handheld Microphone
| 2.4GHz | |
| AB9000 |
Booster, Active Antenna Pair
| 470-870MHz 12VDC 77x65x250mm | Black ABS |
| AD-85 |
Splitter, UHF Antenna 4-Into-1
| 700Mhz-1GHz 50Ohm 120V 420x198x44mm | |
| AEP9000 |
Panel, Antenna Extension, for CW9000RF Series
| 28x45mm | Black |
| AH3000 |
Headphones, Active Protection Stereo, Noise Cancelling Black Trim
| 3.6V 70mAH 75dB | Cobalt Blue |
| ARM-C |
Control, Motor for 4x AR Series
| 198x42x85mm | Black |
| ARM102-RF |
Microphone, Cardioid Condenser Through Desk, Motorised Retracta
| 180-198mm 50Hz-18kHz 200Ohm | Black |
| ARM202-RF |
Microphone, Cardioid Boundary Through Table, Condenser Motorised Retracta
| 3-15mm 50Hz-18kHz 200Ohm | Black |
| ARM202N-RF |
Microphone, Cardioid Boundary Through Table, Condenser Motorised Retracta
| 3-15mm 50Hz-18kHz 200Ohm | Nickel |
| ARMF100-RF |
Microphone, Omni Condenser Through Desk Flush, Motorised Retracta
| 180-198mm 30Hz-20kHz 200Ohm | Black |
| ARMF100N-RF |
Microphone, Omni Condenser Through Desk Flush, Motorised Retracta
| 180-198mm 30Hz-20kHz 200Ohm | Nickel |
| ARMF102-RF |
Microphone, Cardioid Condenser Through Desk, Motorised Retracta
| 180-198mm 50Hz-18kHz 200Ohm | Black |
| ARMF102N-RF |
Microphone, Cardioid Condenser Through Desk, Motorised Retracta
| 180-198mm 50Hz-18kHz 200Ohm | Nickel |
| BUD100 |
Microphone, Single Zone Desk Paging
| | |
| BUD200 |
Microphone, Two Zone Desk Paging
| | |
| C002E-RF |
Microphone, Omni-Directional Condenser, Table/Wall Mount 3 Cable & PPA
| 75x9mm 50Hz-18kHz 200Ohm | Black |
| C002EG-RF |
Microphone, Omni-Directional Condenser, Table/Wall Mount 3 Cable & PPA
| 80x40mm 50Hz-18kHz 200Ohm | Grey |
| C003E-RF |
Microphone, Omni-Directional Condenser, Through Desk 3 Pin XLR
| 90.5x31mm 20Hz-20kHz 200Ohm | Satin Black |
|
Search is in progress, please be patient...