| Catalogue No | Description | Size | Finish |
| 400MS15CP |
Thermostatic Mixing Valve, c/w 2 Intaball Valves &, Top Connector
| 15mm | Chrome |
| 400MX15CP |
Thermostatic Mixing Valve, c/w Service Valve
| 15mm | Chrome |
| 400MX22CP |
Thermostatic Mixing Valve, c/w Service Valve
| 22mm | Chrome |
| 400MZ15CP |
Thermostatic Mixing Valve, c/w 2 Intaball Valves &, Test Point
| 15mm | Chrome |
| 400MZ22CP |
Thermostatic Mixing Valve, c/w 2 Intaball Valves &, Test Point
| 22mm | Chrome |
| 40015CP |
Thermostatic Mixing Valve
| 15mm | Chrome |
| 40022CP |
Thermostatic Mixing Valve
| 22mm | Chrome |
| 41028CPB |
Thermostatic Mixing Valve, Intamix c/w Unions & Check Valve
| 28mm | Chrome |
| 60001CP |
Thermostatic Mixing Valve, Screwed Iron Ends, c/w Check Valves
| 1/2in | Chrome |
| 60003CP |
Thermostatic Mixing Valve, Screwed Iron Ends, c/w Check Valves
| 3/4in | Chrome |
| 60004CP |
Thermostatic Mixing Valve, Screwed Iron Ends, c/w Check Valves
| 1in | Chrome |
| 60005CP |
Thermostatic Mixing Valve, Screwed Iron Ends, c/w Check Valves
| 1.1/4in | Chrome |
| 60006CP |
Thermostatic Mixing Valve, Screwed Iron Ends, c/w Check Valves
| 1.1/2in | Chrome |
| 60007CP |
Thermostatic Mixing Valve, Low Pressure Underbath, Compression
| 22mm | Chrome |
| 60010CP |
Thermostatic Mixing Valve, L Pattern
| 15mm | Chrome |
| 60011CP |
Thermostatic Mixing Valve, L Pattern
| 22mm | Chrome |
| 60013CP |
Balancing Valve, Thermostatic Pressure
| | Chrome |
| 60015CP |
Thermostatic Mixing Valve, c/w Integral Bypass For Sterilisati
| 15mm | Chrome |
| 60020CP |
Thermostatic Mixing Valve, T Pattern L Mix
| 15mm | Chrome |
| 60021CP |
Thermostatic Mixing Valve, T Pattern L Mix
| 22mm | Chrome |
| 60023CP |
Thermostatic Mixing Valve, Screwed Iron Ends, c/w Check Valves
| 2in | Chrome |
| 61022CPB |
Thermostatic Mixing Valve, c/w Isolating Unions
| 22mm | Polished Chrome |
| 61028CPB |
Thermostatic Mixing Valve, c/w Isolating Unions
| 28mm | Polished Chrome |
| 62015CP |
Thermostatic Mixing Valve
| 15mm | Chrome |
Search is in progress, please be patient...