| Catalogue No | Description | Size | Finish |
| 040402H5Z20002M |
Patch Cord, Fibre LC Duplex-LC Duplex, SM/OS2 XB LSZH
| 2m | |
| 040402H5Z20003M |
Patch Cord, Fibre LC Duplex-LC Duplex, SM/OS2 XB LSZH
| 3m | |
| 047202H5Z20002M |
Patch Cord, Fibre LC Duplex-SC Duplex, SM/OS2 XB LSZH
| 2m | |
| 047202H5Z20003M |
Patch Cord, Fibre LC Duplex-SC Duplex, SM/OS2 XB LSZH
| 3m | |
| A909012RDZAAUYYYM |
Cable, 12 Fibre Trunk MTP-MTP OS2 LSZH
| | |
| A909024RDZAAUYYYM |
Cable, 24 Fibre Trunk MTP-MTP OS2 LSZH
| | |
| CCH-UM12-04-89R |
Module, 12 MTP to LC Duplex OS2 Plug & Play
| | |
| CCH-UM24-04-89R |
Module, 24 MTP to LC Duplex OS2 Plug & Play
| | |
| CCHE-CP12-04 |
Panel, CCH Adpt 12 Fibre 6 LC Duplex OS2
| | |
| CCHE-CP72-89 |
Panel, CCH Adaptor 72 Fibre 6x MTP OS2
| | |
| CCHE-CPE4-89 |
Panel, CCH Adaptor 144 Fibre 12x MTP OS2
| | |
| ECM-UM12-04-89G |
Module, 12 Fibre MTP to LC Duplex OS2
| | |
| EDGE-CP24-90 |
Panel, Adaptor 2x MTP OS2
| | |
| EDGE-CP48-90 |
Panel, Adaptor 4x MTP OS2
| | |
| G9090E4GLZ55UYYYM |
Cable, 144 Fibre Trunk MTP-MTP OS2 LSZH
| | |
| G909012GLZ55UYYYM |
Cable, 12 Fibre Trunk MTP-MTP OS2 LSZH
| | |
| G909024GLZ55UYYYM |
Cable, 24 Fibre Trunk MTP-MTP OS2 LSZH
| | |
| H897812GLZ1-Z1650 |
Harness, Univ 12 Fibre OS2 MTP-6xLC Duplex, Cisco MDS 9513/9509/9506
| 1650mm | |
| H897812GLZ2-Z1650 |
Harness, Univ 12 Fibre OS2 MTP-6xLC Duplex, Brocade 48000/DCX/DCX-4S
| 1650mm | |
| H897812GLZ3-Z1650 |
Harness, Univ 12 Fibre OS2 MTP-6xLC Duplex, Cisco 7010/7018
| 1650mm | |
| H897812GLZ4-Z1650 |
Harness, Univ 12 Fibre OS2 MTP-6xLC Duplex, Neutral All Legs 150mm
| 1650mm | |
| H907812GLZ1-W2700 |
Harness, Direct 12 Fibre OS2 MTP-6xLC Duplex, Cisco MDS 9513/9509/9506
| 2700mm | |
| H907812GLZ2-W2700 |
Harness, Direct 12 Fibre OS2 MTP-6xLC Duplex, Brocade 48000/DCX/DCX-4S
| 2700mm | |
| H907812GLZ3-W2700 |
Harness, Direct 12 Fibre OS2 MTP-6xLC Duplex, Cisco 7010/7018
| 2700mm | |
| H907812GLZ4-W2700 |
Harness, Direct 12 Fibre OS2 MTP-6xLC Duplex, Neutral All Legs 150mm
| 2700mm | |
Search is in progress, please be patient...